Windshields: Post manufacture window film can not be placed on the front windshield below the AS1 mark or 5 inches down horizontally from the top of the windshield whichever is less.Ĭolors of Tint: COMAR (11.14.02.14.D.1) Prohibits red, yellow, amber and reflective(mirrored) post manufacture window tint film. These two windows are the only ones that have to meet the 35% light transmittance requirement. Trucks, Vans, SUVs: The only windows regulated on these type of vehicles are the windows immediately left and right of driver. The brake light in the back window cannot be covered by tint. Passenger cars: (2dr, 4dr, station wagons) All windows on these vehicles are regulated and have to meet the 35% light transmittance requirement. Therefore, to meet the State requirement of 35% light transmittance you would need to apply 50% post manufacture window tint film. Most of the regulated glass on vehicles allow between 70-75% light transmittance. All vehicles manufactured for sale in the United States come from the factory with some window tinting already in the regulated windows. These regulations state that windows can have post manufacture window tint film added to allow 35% light transmittance (amount of light going through glass),and indicates the types of vehicles and the locations that tint is permitted. This regulation is set forth in both the Maryland Transportation Article (Title 22 section 406), and the Inspection process for vehicles being registered in Maryland (COMAR Title 11 subtitle 14). The State of Maryland regulates post manufacture window tint film on all motor vehicles registered in the State. Window Tinting Regulations for vehicles registered in the State of Maryland (Legal Tint in MD) Sensitivity to bright lights that can be prevented by protective sun wear is not eligible for a medical tint waiver in Maryland. If you are suffering from excessive light sensitivity, you need to see an eye doctor to determine what the reason is. Sensitivity to bright lights are often caused by the following eye conditions: Contact lenses that fit poorly or are being worn longer than the recommended duration, medical eye conditions such as uveitis or iritis that result from internal inflammation, eye infections, eye injuries, migraine headaches and taking certain medications that may cause the pupils to dilate and allow more light to enter the eye. Because photophobia, people will tend to wear sunglasses more often than would be expected due to the amount of light in their environment. Individuals who have light sensitivity usually prefer dark sunglasses because they reduce glare from lights and prevent discomfort from light exposure. Oftentimes, photophobic individuals don’t know that they’re photophobic until they visit the eye doctor complaining of dry eyes, blurry vision, headaches, dizziness, or nausea after spending time in a brightly lit area such as an office or classroom setting. People who suffer from photophobia also often find it difficult to function at work or school because many workplaces and educational institutions now use the new energy saving LED lights that are much brighter than incandescent and fluorescent lights. These individuals often look for ways to obtain a Maryland tint waiver so they can make their car windows darker. For example, photophobic individuals may avoid driving during daylight hours because glare from sunlight makes their eyes feel painful, dry and uncomfortable. People who are light sensitive, or photophobic, may find it difficult to tolerate environments where they cannot control (or at least influence) lighting conditions.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |